Manage VPP applications

Add VPP applications to the Admin Portal and assign them to the iOS devices or VPP users. For applications you are using the managed distribution type for, you can unassign and reassign the applications.

Add VPP applications (managed distribution)

Add the applications purchased through managed distribution by synchronization.

There are two synchronization methods:

• Automatic synchronization via scheduling in Setting > iOS > VPP Server Setting
• Manual synchronization

To synchronize the applications manually, complete the following steps:

1. Navigate to Application.

2. On the “Application” page, click Sync VPP.

3. In the “Sync VPP” window, click OK.

Add VPP applications (redeemable codes)

Add the purchased applications through redeemable codes by uploading the code spreadsheet on the Admin Portal.

To upload the redeemable codes, complete the following steps:

1. Navigate to Application.

2. On the “Application” page, click Upload Redemption Code.

3. In the “Upload Redemption Code” window, click and select the code spreadsheet downloaded from the VPP website.

4. View the code list and click Save.

Assign a VPP application

NOTE—If you want to assign multiple VPP applications at the same time, see Assign multiple VPP applications.

To assign an application to devices or VPP users, complete the following steps:

1. Navigate to Application.

2. On the “Application” page, search for the application you want to assign.

   To search, enter the application's name. Alternatively, select iOS under Platform & Source and Volume Purchase Program as the source and click Search.

3. Click the check box next to the application, and then click Assign.

4. On the “Assign Application” page, set the Assignment Type:

   • Device (Recommended)—Assign the VPP application to devices.

     TIP—This is based on the device's serial number and works without requiring Apple ID configuration on the device. If you choose this, you don't need to set up any Apple IDs.

   • User—Assign the VPP application to users. For registered users, the VPP application must be installed manually. For associated users, the VPP application will be installed automatically.

5. If you selected Device in the previous step, set the Install Type:

   • Manual—The device owner can only get the applications if they install it manually from the Knox Manage agent's Application Store.

   • Automatic—The application is installed on target devices automatically, without user intervention, after it's assigned to the device. A device user can delete the application after installation if they want to.

6. If you selected Automatic in the previous step, specify whether you want the app to be automatically updated.

7. Select the targets and click Assign:

   • If you're assigning the VPP application to devices, select the target groups or organizations.

   • If you're assigning the VPP application to users, select the target VPP users.

8. In the “Assign Application” window, click OK.

Assign multiple VPP applications

You can assign up to 10 VPP applications at the same time. This operation is only possible if the applications you're assigning will have the same settings. That is, they will have the same Assignment Type, Install Type, and targets.

1. Navigate to Application.

2. On the “Application” page, select the applications you want to assign.

   To search, enter an application's name. Alternatively, select iOS under Platform & Source and Volume Purchase Program as the source and click Search.

3. Click Assign.

   The “Assign Application” page opens. Only one of your selected applications is visible at the top. To expand the list and view all the applications you selected, click See Other Apps.

4. Set the Assignment Type:

   • Device (Recommended)—Assign the VPP applications to devices.

     TIP—This is based on the device's serial number and works without requiring Apple ID configuration on the device. If you choose this, you don't need to set up any Apple IDs.

   • User—Assign the VPP applications to users. For registered users, the VPP applications must be installed manually. For associated users, the VPP applications will be installed automatically.

5. If you selected Device in the previous step, set the Install Type:

   • Manual—The device owner can only get the applications if they install them manually from the Knox Manage agent's Application Store.

   • Automatic—The applications are installed on target devices automatically, without user intervention, after they're assigned to the device. A device user can delete the applications after installation if they want to.

6. If you selected Automatic in the previous step, specify whether you want the apps to be automatically updated.

7. Select the targets and click Assign:

   • If you're assigning the VPP applications to devices, select the target groups or organizations.

   • If you're assigning the VPP applications to users, select the target VPP users.

8. In the “Assign Application” window, click OK.

Unassign a VPP application

You can unassign applications you are using the managed distribution type for. When you unassign an app, that app is automatically uninstalled from the devices you selected.

To unassign an application from devices or VPP users, complete the following steps:

1. Navigate to Application.

2. On the “Application” page, search for the application you want to unassign.

   To search, enter the name or select the iOS for platform and Volume Purchase Program for source and click Search.

3. Click the name of the application you want to unassign.

4. On the “Application Details” page, under the Assigned User or Assigned Group/Organization tab, select the users, groups, or organizations you want to unassign the application from.

5. Click Unassign.

6. In the “Unassign Application” window, click OK.

   The app is automatically removed from the devices.